How to make a trampoline bouncier? | Definitive Guide for 2X Bounce!

Still using an old trampoline and just noticed that trampoline lose bouncing and now wondering how to make a trampoline bouncier then my detailed guide on how to make a trampoline bouncier is going to help in many ways.

A trampoline is a device made of a strong fabric sheet stretched on a steel frame with the help of a coiled spring. Now a day’s trampolines are very popular in outdoor activities. Trampolines are multifunctional devices used for workouts and recreations.

They are popular both in kids and adults also. Trampolines are used for exercise and they can help to develop better balance, coordination, and motor skills. People with joint problems use trampolines to relieve pain and to relax for some time.

How to make a trampoline bouncier than ever?

If you do not have time to go out for exercise then you can bounce on the trampoline for 15 minutes. Trampolines are used to improve the immunity of your body and make you strong and healthy.

So, you can say that trampolines are great fun. Bouncing on a trampoline gives a feeling of being weightless or being able to fly. Whether you are an athlete or a normal person who likes to jump on the trampolines, they all would indeed love to bounce higher and higher.

Here I will guide you on how you make your trampoline bouncier. But first, we will see what are the reasons why trampolines lose bouncing.

Why do trampolines lose bouncing?

Following are some reasons due to which trampolines lose bouncing.

Rusty Spring:

If your trampoline is not made of good material after some time its spring will get rusted as it’s part of nature. Even if you have good quality trampolines but you do not protect them from wind and run then their springs will begin to rust.

Due to rust the spring does not expand and retract as well and at last, the spring will be stuck together and you will not able to bounce on the trampoline.

How to make a trampoline bouncier

Loss of Elasticity:

The constant use of trampolines especially by athletes can lead to loss of elasticity and it badly affects the performance of trampolines. It may be possible that only one spring loses its elasticity so you would have to remove that spring. 

make a trampoline bouncier (1)

Broken Springs:

Some springs in a trampoline can get cracks and then fall apart. So, if you see any broken spring then you would have to replace it immediately. Broken Springs are easy to identify if you check them once a month.

make a trampoline bouncier (1)

Considerations you Should Make to Bounce Safely on Trampoline:

Bouncing on a trampoline will give you great pleasure. When you bounce then you fly up and then landing below gives you a feeling you hardly get anywhere else.

If you make your trampoline bouncier then you will get yourself higher into the air.

But before you do this you must consider a few things:

A Safety Net:

The safety nets are more important and necessary in trampolines because if you bounce higher then there will be a great chance of losing control and it may be possible that you will find yourself off on the trampoline and the ground.

So, if you want that you make your trampoline bouncier then you should use a safety net to make yourself and others safe.

You should check that your safety net is tight and all the bolts and screws are in their place.

If you do not buy a safety net then you will have to pay that amount to the doctor if you get injured when bouncing on a trampoline.

A Spring Cover:

Just like safety nets spring cover is also necessary when you make your trampoline bouncier.

If someone accidentally lands on the ground then spring cover keeps the spring safe in that case.

If spring cover is not used then if you landed on uncovered springs, then either the spring will break or the person will badly hurt.

Safe Area:

When you get a higher bouncer, there will be more chance that you bounce off your trampoline area.

Since your trampoline bounce is going to be high, you will need more clear space around your trampoline. So, whenever the trampoline becomes bouncier, you will have to be more careful.

How to improve your trampoline’s performance?

Trampolines bouncing depends on the springs and the trampoline mate. So, for a good bounce, the trampoline spring and mate should always be in good condition. The spring stretching efficiency will be good enough for the feedback force of your weight on the trampoline mat.

Scheduled Maintenance of your trampoline for more bounce: 

It is very important to keep your trampoline in proper operating condition to improve its performance also to keep it safe.

With time the pieces of trampoline decline and work properly so you should have proper knowledge of that parts. You should check it properly once a month to catch all the problems before any big damage occurs.

A few loose screws on the trampolines will displace the legs or the frame of trampolines so they will not be able to store kinetic energy.

You should also check the worn-out areas in the jumping mat, also check the rusted spring.

Keeping your trampoline in good condition is the proper preventing measure to increase the lifespan of the trampoline and you will get a good bounce.

Add more springs:

The springs play a very important role in stretching the trampoline for a safe and effective bounce. As in the trampolines, the springs are already installed but if you feel that these installed springs do not provide the right bounce then you will have to add more springs.

To install new springs in a trampoline is not an easy task, you will have to hire some expert and professional technicians to install the new sets of springs.

But it should be kept in mind that all the trampolines designs are not suitable to add new springs in it. Also, Quality springs are more expensive.

Replace the existing/old springs for higher bounce:

If you use the trampoline for a long period then you should change the springs because the old sprigs decline the bounce of your trampoline. Because when you constantly use the trampoline then the spring will lose its elasticity, and it will greatly affect the trampoline performance. So, you have to replace these springs with new ones.

With time, the trampoline springs get rust and the rusty springs have a red tint on them so you will easily identify that rusty spring. You will have to replace that rusty spring. You should also check the worn-out springs should be replaced.

Crossing the springs for a bounce from trampoline:

If you put the springs in different combinations, can give your trampoline additional bounce. But there is also the risk that crossing the springs may cause them to wear out faster, so you will have to replace them more frequently.

Some options for crossing over springs include

Crisscross Pattern (X-Pattern):

 This pattern is a bit different. It requires crossing one spring over the other. You will need to take two springs and switch their end hook position with one another, This will create an X pattern.

There is another variation of the X pattern and that is the double X or double-cross pattern. You need to take four springs instead of two and you crisscross those springs. The double-cross pattern is the strongest.

It is really hard to pull those strings together. You should have a spring tool while you do your work.

With this method, you will not have to purchase any additional spring.

crisscross pattern

V-Pattern:

In this pattern, you take 3 springs and remove the middle one. You use the last 2 springs to connect them and make a V shape. Now use the end hooks of the last two springs to connect them to the end place where the middle spring was.

You can also make a titled V shape using only 2 springs. Take one spring and attach the hook end to another spring’s place. You will have two springs in one hook. one is straight and another is titled which will represent a V shape.

In this option, you also do not require to purchase any additional springs.

v pattern

W-Pattern:

This method is more difficult than the other two, you would also need to purchase additional springs to make it work, but it provides a very good bounce.

Three springs should be linked to every third rung on your jumping platform, whereas the others should just have one. The three-spring rung directly over from the one on your jump pad should only hook up with one spring. 

Two springs should be linked to all of the other rungs on your frame. Your spring should make a W-pattern when done correctly, with an additional spring coming out of the top of the W.

w pattern

How to make your trampoline bouncier without crossing the spring:

If you notice that your springs show signs of wear and tear, then there will be just one method to restore your bounce. Replace the spring with new ones. However, because new springs take time to break in, you might want to consider crossing them, at least they have been put to good use.

Using Stronger Springs:

If you have done your every effort and still don’t have enough bounce, then you should try purchasing some heavier duty springs if you are changing your springs.

These springs are made of galvanized steel. The galvanized steel means that they are stronger and last longer through the wind and the rain. So, you will not have to worry about galvanized steel, heavy-duty springs do not get rusted.

The heavy-duty springs will take a longer time to wear out than normal. These springs can store more kinetic energy and then reflect you the same, due to which you will get more bounce from your jump.

Using Double Spring:

The trampolines with more springs will offer more good bounce. Some designs of trampolines support more springs than the others, if you don’t have that type of trampoline, you may still double the number of springs by employing some of the spring crossing techniques as discussed previously.

Performance Springs:

There are multiple trampoline brands available. However, performance springs are more expensive but often last longer than standard springs.

High-performance springs are made out of heavy-duty materials that withstand outdoor climates. Its construction is highly elastic and durable. As these springs are stronger, the more kinetic energy they have, so you can bounce higher when jumping.

Conclusion:

Just like other things that you buy, trampolines also wear out. You cannot prevent the trampoline from losing effect but can be restored if it occurs. 

If the trampoline begins to decline then you can use the above methods on how to make a trampoline bouncier to increase its bounces, you want to save future expenditure you should invest more money on the quality trampoline. 

You should regularly maintain your trampoline by checking the screws and should replace the old and rusty spring. To repair the trampoline, you should hire an expert technician. 

You should not jump on the edges of the trampoline, you should jump on the middle of the trampoline to get the highest bounce. This also increases safety and reduces the chance of an accident when jumping too close to the edges.

A final tip to prolong the life of your trampoline is to check the weight limit if the trampoline is used by all people including adults. If the weight exceeds the stated limit then the spring will lose elasticity.